Installing Modules - Fujitsu Siemens Computers WF2H Easy Manual

Inserting and removing modules
To remove the left-hand module, push the slide to the right. To remove the right-hand
i
module, push the slide to the left.
Ê
Remove the module the direction of the arrow (2).

Installing modules

Ê
Push the slide in the direction of the arrow up to the stop (1).
To install the left-hand module, push the slide to the right. To install the right-hand
i
module, push the slide to the left.
Ê
Position the module at the edge of the casing (2) and then press it into the workstation.
Ê
Release the slide (2).
A26391-K115-Z120-2-7619
Working with the workstation
1
2
39