ASROCK X299E-ITX/ac User Manual page 59

X299E-ITX/ac
PCIE PLL Divider
Configure the PCIE PLL divider.
SRCO Source
Select CPU PLL or PCIE PLL as the SRCO source.
ClockGen Delay
Configure the delay at the beginning of Clockgen.
ClockGen GPIO
Configure the General-purpose input/output (GPIO) at the beginning of Clockgen.
Boot Performance Mode
Select the performance state that the BIOS will set before OS handoff.
Intel Turbo Boost Technology
Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.
Intel SpeedStep Technology
Intel SpeedStep technology allows processors to switch between multiple frequen-
cies and voltage points for better power saving and heat dissipation.
Intel Speed Shift Technology
Enable/Disable Intel Speed Shift Technology support. Enabling will expose the
CPPC v2 interface to allow for hardware controlled P-states.
Intel Turbo Boost Max 3.0 Technology
Processors supporting the Intel Turbo Boost Max Technology 3.0 feature contain at least
one processor core whose maximum turbo frequency is higher than the others.
Adjust Pll
Adjust the Pll for higher -BCLK ration combination.
Change Pll Trim Value
Adjust the Pll value between +63 ro -63.
Change Pll Trim Prefix
Adjust the Pll Trim Prefix.
53