FujiFilm X-E3 Owner's Manual page 130

Setting Setting
B
Flash compen-
sation/output
C
Flash mode
(TTL)
5
D
Sync
110
Adjust fl ash level. The options available vary with
the fl ash control mode (
Choose a fl ash mode for TTL fl ash control. The op-
tions available vary with the shooting mode (P, S,
A, or M) selected.
•
E (FLASH AUTO): The fl ash fi res only as required;
fl ash level is adjusted according to subject
brightness. A p icon displayed when the shut-
ter button is pressed halfway indicates that the
fl ash will fi re when the photo is taken.
•
F (STANDARD): The fl ash fi res with every shot if
possible; fl ash level is adjusted according to sub-
ject brightness. The fl ash will not fi re if not fully
charged when the shutter is released.
•
G (SLOW SYNC.): Combine the fl ash with slow
shutter speeds when photographing portrait
subjects against a backdrop of night scenery.
The fl ash will not fi re if not fully charged when
the shutter is released.
Choose whether the fl ash is timed to fi re imme-
diately after the shutter opens (H/1ST CURTAIN)
or immediately before it closes (I/2ND CURTAIN).
1ST CURTAIN is recommended in most circum-
stances.
Description Description
A
).