Felker FTS-150 Operating Instructions And Parts List Manual page 9

WARNING:
INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.
operate this machine unless you have read and understood this operator's manual.
DO NOT
operate this machine without the blade guard, or other protective guards in place.
DO NOT
DO NOT stand behind or in front of the blade path while the motor is running.
leave this machine unattended while the motor is running.
DO NOT
DO NOT work on this machine while the motor is running.
operate this machine when you are tired or fatigued.
DO NOT
DO NOT use a wet blade without adequate water supply to the blade.
exceed maximum blade speed shown for each blade size. Excessive speed could result in blade breakage.
DO NOT
operate the machine if you are uncertain of how to run the machine.
DO NOT
DO NOT use damaged equipment or blades.
touch or try to stop a moving blade with your hand.
DO NOT
DO NOT cock, jam, wedge or twist the blade in a cut.
use a blade that has been dropped or damaged.
DO NOT
DO NOT use carbide tipped blades.
use abrasive blades.
DO NOT
touch a dry cutting diamond blade immediately after use. These blades require several minutes to cool
DO NOT
after each cut.
DO NOT use damaged or worn blade flanges.
allow other persons to be near the machine when starting or when the machine is in operation.
DO NOT
DO NOT operate this machine in an enclosed area unless it is properly vented.
operate this machine in the vicinity of anything that is flammable.
DO NOT
explosion.
allow blade exposure from the guard to be more than 180 degrees.
DO NOT
DO NOT operate this machine with the blade guard removed.
operate this machine unless you are specifically trained to do so.
DO NOT
DO NOT use a blade that has been over heated (Core has a bluish color).
jam material into the blade.
DO NOT
DO NOT grind on the side of the blade.
lay power cords in or near the water.
DO NOT
replace the motor with any motor that does not have a special grounding connection.
DO NOT
DO NOT stand or lean on machine.
start cutting with a saw until you have a clear work area and secure footing.
DO NOT
DO NOT operate this machine while using drugs or alcohol.
This saw was designed for certain applications only. DO NOT modify this saw or use for any application
other than for which it was designed. If you have any questions relative to its application, DO NOT use the
saw until you have written Electrolux Construction Products and we have advised you.
SAFETY FIRST!
DO'S AND DO NOTS
FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING
WARNINGS
DO NOT
****************
Sparks could cause a fire or an
Electrolux Construction Products
17400 West 119th Street
Olathe, Kansas 66061
1-800-365-4003
9