View Wireless Client List; View System Information - TRENDnet TEW-823DRU User Manual

TRENDnet User's Guide

View Wireless Client List

Advanced > Wireless (2.4GHz or 5GHz) > Station List
You can view the list of active wireless devices currently connected to your router.
1
Log into your router management page (refer to
2
Click on Advanced > Wireless (2.4GHz or 5GHz) > Station List.
3
In Wireless Network section, review the connected devices.
ͫ MAC Address: Display the current MAC address of your 2.4GHz or 5GHz wireless
client.
ͫ Mode: Display the 802.11 mode associated with the client.
ͫ Rate: Display the estimated data rate established with the client.
ͫ Signal: Display the estimated signal strength associated with the client.

View System Information

Advanced > Administrator > Status
You may want to check the system information of your router such as WAN (Internet)
connectivity, wireless and wired network settings, router MAC address, and firmware
version.
1
Log into your router management page (refer to
2
Click on Advanced > Administrator > Status.
3
In System Info section, view the following values:
ͫ Firmware Version: Display the current firmware version your router is running.
ͫ System Time: Display the current time set on your router.
ͫ System Up Time: Display the duration your router has been running continuously
without a restart/power cycle (hard or soft reboot) or reset.
© Copyright 2014 TRENDnet. All Rights Reserved.
"Log in to Management Page" on page
"Log in to Management Page" on page
4
In Internet Configuration section, view the following values:
ͫ Connected Type: Display the current WAN connection type applied.
ͫ WAN IP Address: Display the current IP address assigned to your router WAN port or
interface configuration.
ͫ Subnet Mask: Display the current subnet mask assigned to your router WAN port or
8).
interface configuration.
ͫ Default Gateway: Display the current gateway assigned to your router WAN port or
interface configuration.
ͫ Primary/Secondary DNS (Domain Name System) Server: Display the current DNS
address(es) assigned to your router port or interface configuration.
ÍNote:
ͳ Renew/Release buttons will be available only for DHCP WAN type. The
Renew button allows to renew your WAN IP address and Release button
8).
allows you to release the WAN IP address of your router.
ͳ Connect/Disconnect buttons will be available only for PPPoE DHCP WAN type.
The Connect button allows the connection to your DSL ISP and Disconnect
button allows to disconnect from your DSL ISP.
TEW-823DRU
45