Sony Trinitron KV-EX29 Operating Instructions Manual page 7

Note
• If you select "DVD" on your TV screen, no signal will be output at the
Connecting a DVD player using the COMPONENT VIDEO
(DVD) IN jacks
1 Using an audio cable, connect R and L under the COMPONENT VIDEO (DVD) IN
jacks on your TV to the LINE OUT, AUDIO R and L output connectors on your
DVD player.
2 Using a component video cable, connect Y, C
VIDEO (DVD) IN jacks on your TV to the COMPONENT VIDEO OUT Y, C
C output connectors on your DVD player.
R
3 Press VIDEO on the remote or TV/VIDEO on the TV until "DVD" appears on the
screen.
DVD player
S VIDEO OUT
COMPONENT VIDEO OUT
C C Y
R B
To audio
output
To component
video output
Notes
• If your DVD player can output interlace and progressive mode signals,
select the interlace output when connecting to COMPONENT VIDEO
(DVD) IN input on your TV. Your TV can receive either 525i/60Hz or
625i/50Hz interlace signals.
• Some DVD player terminals may be labeled differently:
Connect
Y (green)
C
C
• When connecting to the COMPONENT VIDEO (DVD) IN jacks on your
TV, you must connect Y, C
connect L and R to receive analog audio signals.
MONITOR OUT jacks (see page 11).
LINE OUT
R-AUDIO-L VIDEO
To
L (white)
R (red)
Audio cable
(not supplied)
Component video cable
(not supplied)
To (on the DVD player)
Y
(blue) C , B-Y or P
B b
(red) C , R-Y or P
R r
, and C under the COMPONENT
B R
COMPONENT VIDEO(DVD) IN
R L Y C C
B R
To COMPONENT VIDEO
(DVD) IN input
B
R
, and C to receive the video signals, and
B R
, and
B
Rear of TV
: Signal flow
continued
Using Your New TV
7