M+Fx5-4Da_Waveoutputsetting - Mitsubishi Electric MELSEC iQ-F FX5 Reference

3.3

M+FX5-4DA_WaveOutputSetting

Name
M+FX5-4DA_WaveOutputSetting
Overview
Item
Overview
Symbol
Labels
■Input label
No. Variable name
(1) i_bEN
(2) i_stModule
(3) i_uCH
(4) i_uOutputSelect
(5) i_wOutputValue
(6) i_udStartingAddr
(7) i_udPointsSetting
(8) i_wFrequency
3 ANALOG OUTPUT MODULE FB
16
3.3 M+FX5-4DA_WaveOutputSetting
Description
Sets the wave output of a specified channel or all channels.
M+FX5-4DA_WaveOutputSetting
(1) B : i_bEN
(2) DUT : i_stModule
(3) UW : i_uCH
(4) UW : i_uOutputSelect
(5) W : i_wOutputValue
(6) UD : i_udStartingAddr
(7) UD : i_udPointsSetting
(8) W : i_wFrequency
(9) UW : i_uConvSpeed
(10) UW : i_uUnitType
Name Data type
Execution command Bit
Module label Structure
Target channel Word [Unsigned]
Output selection Word [Unsigned]
during waveform
output stop
Output setting value Word [Signed]
during waveform
output stop
Waveform pattern Double word
start address setting [Unsigned]
Number of waveform Double word
pattern points setting [Unsigned]
Number of waveform Word [Signed]
outputs setting
o_bENO : B (11)
o_bOK : B (12)
o_bErr : B (13)
o_uErrId : UW (14)
Range Description
ON, OFF ON: The FB is activated.
OFF: The FB is not activated.
The setting range Specifies the module label for the analog output
differs depending on module.
the module label.
1 to 4, 15 • 1 to 4: The corresponding channel number is
specified.
• 15: All channels are specified.
0: 0 V/0 mA Specifies the output value during wave output stop.
1: Offset value
2: Output setting
value during
waveform output
stop
■When an output
Sets the value to be output when 2 (Output setting
range is 0 to 5 V, 1 to value during waveform output stop) is selected in the
5 V, 0 to 10 V, 0 to 20 output selection during waveform output stop.
mA, or 4 to 20 mA
0 to 32767
■When an output
range is -10 to 10 V
-32768 to +32767
10000 to 89999 Sets the start address of a wave pattern to be output.
1 to 80000 (point) Sets the number of data points of a wave pattern to be
output.
-1: Infinite repetition Sets the number of output times of a wave pattern.
output
1 to 32767: Specified
number of times
output