Kenmore 790.9772 series Use & Care Manual page 19

Setting the Oven Lock
The controls the oven lock feature. The oven lock automati-
LOCK
cally locks the oven door and prevents the oven from being
turned on. It does not disable the cooktop, clock, timer or the
interior oven light. The ovens can be locked individually.
To activate the oven lock feature:
1. Press Upper or Lower Oven.
2. Press and hold for 3 seconds.
LOCK
3. After 3 seconds, DOOR, LOCKED will flash and Loc will
appear in the display.
Once the oven door is locked the DOOR and LOCKED indicator
will stop flashing and remain in the display. Allow 15 seconds for
the oven door to lock completely.
To reactivate normal oven operation by unlocking door:
1. Press Upper or Lower Oven.
2. Press and hold for 3 seconds. Loc will disappear from
LOCK
the display. DOOR and LOCKED will flash in the display
until the door has completely unlocked and the oven will be
operational. The oven lock can be set for one oven or both.
An unlocked oven may be used if the other is locked.
Operating Oven Light
The interior oven light will automatically turn on when the oven
door is opened. Press to turn the interior oven light on and
off whenever the oven door is closed.
Important note: The oven light will not operate during self clean.
The interior oven light is located on the left wall of the oven
interior and covered with a glass shield to protect the bulb from
high temperatures. The shield should always be in place
whenever the oven is in use. To replace the interior oven light,
see Replacing oven lights in the Care and Cleaning section.
Setting Temperature Display -- Fahrenheit or Celsius
The Broil and Self Clean keys control the Fahrenheit or Celsius
temperature display modes. The oven can be programmed to
display temperatures in Fahrenheit or Celsius. The oven has been
preset at the factory to display in Fahrenheit. Both ovens will be
changed at the same time.
To change display from Celsius to Fahrenheit or Fahrenheit to
Celsius:
1. Press and hold the Broil key for about 6 seconds until it
beeps: F or C appears in the display. The F means the oven
is set for Fahrenheit and C means the oven is set for Celsius.
Figure 22: The display will show the temperature setting for
Fahrenheit or Celsius
2. Press Self Clean to toggle between Fahrenheit or Celsius
modes.
3. Press to accept the change or press
change.
Setting Silent Control Operation
The Self Clean and Delay Start keys are used to set the silent
control operation which allows the oven to be operated without
sounds whenever necessary. The control can be returned to
operating with all the normal sounds and beeps.
To change from normal sound to silent operation:
1. Press and hold Delay Start for 6 seconds. The display will
show dashes and then change to bEEP On in the display.
Figure 23: Audible operation (L) Silent operation (R)
2. Press Self Clean to switch between normal sound operation
and silent mode.
3. Press to accept the change or press
change.
Note: In silent operation the control will still beep at the end of a
timer and when a set temperature has been reached.
19
Setting Oven Controls
to reject the
to reject the