Table of Contents
Advertisement
The Storage Drawer
The storage drawer is for storing pots and pans. The drawer can be removed
to make it easier to clean under the range, and to check for installation of the
anti-tip bracket.
Use care when handling
the drawer.
Removing the storage dmwer
-
I/-
1.
Empty drawer of any pots and
pans before removing drawer. Pul
drawer straight out to the first stop.
Lift front and pull out to the second
stop.
4
Replacing the stomge dmwer
2. Lift back slightly and slide drawer
I
all the way out.
1.
Fit ends of drawer slidxails
into
the drawer guides on both sides
of opening.
2. Lift drawer frontand push in until
metal stops on drawer slide
rails clear white stops on drawer
guides. Lift drawer front again
to clear second stop and slide
drawer closed.
To vertty the antl-tlp
bracket
Is engaged:
l
Remove the storage drawer.
. Look to see if the anti-tip bracket
is attached to floor with screws.
. Make sure one rear leveling leg
is positloned under the anti-tip
bracket.
. See Installation Instructions for
further details.
17
Advertisement
Table of Contents
