Syntax
ip igmp robustness
no ip igmp robustness
robustness — Robustness variable. (Range: 1-255)
•
Default Configuration
The default robustness value is 2.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures a robustness value of 10 for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp robustness 10
ip igmp startup-query-count
Use the ip igmp startup-query-count command in Interface Configuration
mode to set the number of queries sent out on startup
the startup query interval for the interface.
Syntax
ip igmp startup-query-count
no ip igmp startup-query-count
count — The number of startup queries. (Range: 1-20)
•
Default Configuration
The default count value is 2.
robustness
count
at intervals equal to
—
IGMP Commands
931