Aaa Authorization Network Default Radius - Dell PowerConnect 7000 Series Reference Manual

the final method in the command line. For example, if none is specified as an
authentication method after radius, no authentication is used if the RADIUS
server is down.
Example
The following example configures authentication login.
console(config)# aaa authentication login default
radius local enable none

aaa authorization network default radius

Use the aaa authorization network default radius command in Global
Configuration mode to enable the switch to accept VLAN assignment by the
RADIUS server.
Syntax
aaa authorization network default radius
no aaa authorization network default radius
Default Configuration
By default, the switch does not accept VLAN assignments by the RADIUS
server.
Command Mode
Global Configuration mode
User Guidelines
The RADIUS server can place a port in a particular VLAN based on the result
of the authentication. VLAN assignment must be configured on the external
RADIUS server.
Example
The following example enables RADIUS-assigned VLANs.
console(config)#aaa authorization network default
radius
245
AAA Commands