Motorola SVG2500 User Manual page 18

Hide thumbs Also See for SVG2500:

This document is uncontrolled pending incorporation in PDM

2 INSTALLATION

Connecting a PC to the SVG2500 USB Port

You can connect a single PC running Windows 2000, Windows XP , or Windows Vista

to the SVG2500 USB port.

Caution!

To connect a PC to the SVG2500 USB port:

1. Insert the SVG2500 Installation CD-ROM in the CD-ROM drive to install the USB

driver. See

version you are running.

2. Connect the USB cable to the USB port on the back of the SVG2500.

3. Connect the other end of the USB cable to the USB port on the computer.

Obtaining an IP Address for an Ethernet Connection

You can use either of the following two options to obtain the IP address for the

network interface on your computer:

•

Retrieve the statically defined IP address and DNS address

•

Automatically retrieve the IP address using the Network DHCP server

The Motorola SVG2500 gateway provides a DHCP server on its LAN. It is

recommended that you configure your LAN to obtain the IPs for the LAN and DNS

server automatically.

Before plugging in the USB cable, be sure the SVG2500 Installation CD-ROM is inserted in the

PC CD-ROM drive.

Installing USB Drivers

for the applicable procedure for the Windows