Miele KM 5670 Operating And Installation Instructions page 39

Programme*
P 7 Extended cooking
area when switching
on a cooking zone
P 10 Power setting when
the cooking zone is
switched on
P 12 Auto heat-up
P 13 Residual heat
indicator
* Programmes not shown here have no allocation.
** The factory default settings are shown in bold.
Status** Setting
S 0 Not switched on at the same time
Switches on at the same time as
follows:
S 1 Front left
S 2 Front right
S 3 Back middle (KM 5673)
S 4 Back right (KM 5670)
S 5 Front left and front right
S 6 Front left and back middle (KM 5673)
S 7 Front left and back middle (KM 5673)
S 8 Front left and back right (KM 5670)
S 9 Front right and back right (KM 5670)
S 10 Switch on all extended areas
S 0 0
S 1 6 (can only be selected when Auto
heat-up is activated)
S 0 Off
Activated by selecting the power
S 1
setting using -
S 2 Activated by selecting the power
setting using +
S 3 Activated every time the cooktop is
switched on
H as the residual heat indicator symbol
S 0
# as the residual heat indicator symbol
S 1
Programming
39