Siemens Tek wireless enhancement User Manual page 24

10
Using the remote control with a phone
Taking a call...
...when remote control and phone are connected
The ringing is audible in your hearing
instruments.
The remote control indicates an inco-
ming call.
Press
Speak into the microphone of the remote control to talk.
You need to speak within a range of about 0.5m (inches)
from the microphone.
Press
Your hearing instruments switch back to the hearing pro-
gram you used before taking the call.
...when remote control and phone are not connected
The ringing will not be audible in your hearing instruments.
The remote control does not show an incoming call.
Press
control.
Press
Speak into the microphone of the remote control to talk.
You need to speak within a range of about 0,5m (inches)
from the microphone.
24
Depending on your phone, there might be no ringing
audible in your hearing instruments when the phone
is in silent mode.
to accept the incoming call.
to terminate the call.
to transfer the incoming call to the remote
to accept the incoming call.