Key To Symbols; Symbols On The Machine; Symbols In The Operator's Manual - Husqvarna 565 Operator's Manual

Symbols on the mac hine:
W ARNING! Chainsaws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the
machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European Community's
Directive. The machine's emission is
specified in the Technical data chapter
and on the label.
Chain brake, activated (right)
Chain brake, not activated
(left)
Decompression valve
Ignition; choke
Air purge
Adjustment of the oil pump
Refuelling.
Chain oil fill.
2 – English
KEY T O SYMBOLS
If your machine bears this symbol it
is equipped with heated handles.
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
Symbols in the operator' s
manual:
Switch off the engine b y
moving the start/stop switch to
the STOP position before
carrying out any checks or
maintenance. CAUTION! The
start/stop switch automatically
returns to run position. In order
to prevent unintentional starting, the spark plug cap must
be removed from the spark plug when assembling,
checking and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged when
the chainsaw is started.
WARNING! Kickback may occur when the
nose or tip of the guide bar touches an
object, and cause a lightning fast reverse
reaction, kicking the guide bar up and
towards the operator. May cause serious personal injury.