Operation; Know Your Tiller - Poulan Pro PPCRT17 Operator's Manual

KNOW YOUR TILLER

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER.
Compare the illustrations with your tiller to familiarize yourself with the location of various controls and adjustments. Save
this manual for future reference.
These symbols may appear on your Tiller or in literature supplied with the product. Learn and understand their
meaning.
TILLING FORWARD NEUTRAL /
EMERGENCY
DISENGAGE
DRIVE
CONTROL
BAR
DEPTH STAKE
LEVELING
SHIELD
OUTER
SIDE SHIELD
Our tillers conform to the safety standards of the American National Standards Institute.
ENGINE ON/OFF SWITCH - The engine switch enables
and disables the ignition system.
FUEL VALVE - The fuel valve opens and closes the pas-
sage between the fuel tank and the carburetor.
DEPTH STAKE - Controls depth at which tiller will dig.
DRIVE CONTROL BAR - Used to engage tines.
LEVELING SHIELD - Levels tilled soil.
OUTER SIDE SHIELD - Adjustable to protect small plants
from being buried.

OPERATION

CAUTION ENGINE
REVERSE
OR WARNING ON
SHIFT/EMERGENCY
DISENGAGE LEVER
MEETS ANSI SAFETY REQUIREMENTS
ENGINE FAST SLOW
OFF
THROTTLE
CONTROL
SHIFT LEVER
IN DI CA TOR
Fig. 8
RECOIL STARTER HANDLE - Used to start the engine.
SHIFT/EMERGENCY DISENGAGE LEVER - Used to
shift transmission gears and to disengage powered drive
and tines.
SHIFT LEVER INDICATOR - Shows which gear the trans-
mis sion is in.
THROTTLE CONTROL - Controls engine speed.
8
CHOKE FUEL OIL
FUEL
VALVE
RECOIL
STARTER
HANDLE
RUN
STOP
ENGINE
ON/OFF
SWITCH