Tektronix PHASER 840 Quick Reference Manual page 33

Environmental specifications
Characteristic
Temperature
Operating
Storage and
shipping
Humidity
Operating
Non-operating
Altitude
Operating
Non-operating
Vibration/shock
Non-Operating
(vibration)
Non-operating
(shock)
Operating (shock)
Specification
°
10
to 32 C (50 to 90
°
-30
to 60 C (-22 to 140
10 to 80% relative humidity, non-condensing
10 to 95% relative humidity, non-condensing
0 to 2400 m (8,000 ft.) at 25
0 to 15000 m (50,000 ft.)
Will withstand 0.15 G excitation, 5 to 200 Hz, 3 axes for up to
7 minutes with no impairment or subsequent damage.
0.5 g, 25 minute sweep, 5-200-5 Hz, 100-200 sec/sweep
cycles
The printer may have any corner raised and dropped 1.5 cm
(0.6 in.) while printing is in progress, without impairment of
operation that cannot be recovered by a printhead purge
cycle. The printer may have any corner raised and dropped
6 cm (2.4 in.) while idle without subsequent impairment of
operation.
°
F)
°
F)
°
C
Service Guide
23