Acura MDX Sport Hybrid 2017 Manual page 380

About camera view image
Condition
Camera view images The images may not be displayed clearly when:
are hard to see. • At night, in rainy condition, and a dark
location.
• The camera lens has insects, moist, or
debris stuck to the camera lens.
• The camera lens is scratched.
• The temperature of the camera is high.
• Strong light such as the sun's light shines
on the camera.
• When light shines on the camera in a
dark location.
*1: When strong light shines on the
camera, halation which fogs around
the light source or smearing which
creates the streaks of the light may
occur.
Camera view images If the camera lens is dirty, clear images are not
are not clear. displayed.
Camera position is The camera body or its surrounding parts have
shifted. been subject to some severe impact or pressure.
Cause
• When the camera view image is not clearly
displayed due to weather conditions, etc,
visually confirm the safety using mirrors.
*1
• When the camera lens is dirty, wipe off the dirt,
debris, and the like using water, mild
detergent, or glass cleaner.
• Never use any benzine, thinner, or polishing
powder such as cleanser. It will cause damage
to the lens.
• Do not have any severe impacts or pressures on
the camera body or its surrounding parts.
• In case of being subject to an impact, stop
using the camera and contact a dealer.
uuTroubleshootinguAbout camera view image
Solution Refer to:
-
-
-
379