Datavideo NVW-150 Instruction Manual
Datavideo NVW-150 Instruction Manual

Datavideo NVW-150 Instruction Manual

Long range wireless distribution

Advertisement

Quick Links

LONG RANGE WIRELESS
DISTRIBUTION
NVW-150/NVW-250
Instruction manual
w w w . d a t a v i d e o . c o m

Advertisement

Table of Contents
loading

Summary of Contents for Datavideo NVW-150

  • Page 1 LONG RANGE WIRELESS DISTRIBUTION NVW-150/NVW-250 Instruction manual w w w . d a t a v i d e o . c o m...
  • Page 2: Table Of Contents

    Contents Packing List ................... 4 NVW-150 ..................4 NVW-250 ..................4 Operation Modes ................. 7 Access Point WDS Mode ..............7 Station WDS Mode ................8 Repeater WDS Mode ............... 9 Station Mode ................... 9 Access Point Mode ................. 10 Router Mode ..................
  • Page 3 Basic Wireless ................25 Advance Wireless ................43 Basic Network ................48 Advanced Network ................ 52 Services Tab ................... 59 System Tab ..................63 VLAN Tab ..................68 Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 4: Packing List

    Packing List NVW-150 Description NVW-150 main unit Ethernet cable ¼ hot shoe mount International mains PSU Instruction manual 3 dBi antenna NVW-250 Description NVW-250 main unit Ethernet cable Instruction Manual 5 dBi antenna Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 5 FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 6 The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co- located or operating in conjunction with any other antenna or transmitter. ICES 003 Statement This Class B digital apparatus complies with Canadian ICES-003. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 7: Operation Modes

    Access Point WDS Mode This is mode is generally used for point-to-point or point-to-multi- point connections between NVW units. A unit in Access Point WDS mode should be used in conjunction other units in Station WDS Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 8: Station Wds Mode

    Ethernet cable between them. One unit is setup as Access Point One unit is setup as Access Point WDS and the other as Station WDS and several other devices WDS (Transparent Client). as Station WDS (Transparent Clients). Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 9: Repeater Wds Mode

    Station Mode In Station mode the device acts as a wireless client. Use this mode to connect the NVW unit to any standard access point or wireless router. When connected to an access point the wired Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 10: Access Point Mode

    Router Mode In Router Mode, the device operates as a router. Either the wireless or Ethernet can be setup as the WAN connection. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 11: Quick Setup (Pairing Multiple Nvw Units)

    Static IP, Dynamic IP and PPPoE. Quick Setup (Pairing multiple NVW Units) By default the NVW-150 and NVW-250 units are configured ready to pair with each other, we simply need to specify which unit will be the access point and which unit(s) will be the station(s).
  • Page 12 Configuration Walkthrough One the first NVW-150 or NVW-250 Unit 1. Assign your computer a static IP address in the 192.168.168.X range (192.168.168.254 for example) and connect to the units Ethernet port. 2. Open a web browser (For example Google Chrome, Internet Explorer) and navigate to 192.168.168.1.
  • Page 13 WPA Preshared Key field. 15. Click Apply Settings and then save the changes. One the second NVW-150 or NVW-250 Unit 1. Connect your computer to the second units Ethernet port. 2. Open a web browser (For example Google Chrome, Internet Explorer) and navigate to 192.168.168.1.
  • Page 14 11. Click Apply Settings and then save the changes. 12. Both units are now configured and should pair after a short period. 13. Optional: You can configure the secondary radio as you did for the first unit. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 15: Quick Setup (Use A Single Nvw Unit As A Wifi Access Point)

    8. Optional: If you do not intend to manually assign all connected devices IP addresses you may want to enable the devices DHCP server, this will automatically issue an IP address to any device connected to both NVW units (this Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 16 To enable security select the WPA2 option from the Security drop down menu and then enter your password of choice into the WPA Preshared Key field. 16. Click Apply Settings and then save the changes. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 17: Hardware Configuration & Considerations

    As standard the NVW-250 is fitted with 5dBi Omni directional antennas for the high power backhaul radio and the secondary radio, the NVW-150 is fitted with 3dBi antennas. These antennas provide a wide (almost spherical) signal spread so are ideal for cases when the...
  • Page 18: Antennas And Wifi Power Limits

    8 dBi Omni-Directional Antenna This Omni-directional antenna is ideal for linking two or more (Point to Multipoint) NVW-150 / NVW-250 units over longer distances. Its 360 degree horizontal beam width allows the unit in Access Point WDS mode to be located in a central location and have many more units in station WDS mode located around it.
  • Page 19 (See data sheet for aggregate power values). The aggregate transmit power only needs to be considered when using 802.11N data rates that use multiple streams Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 20: Antenna Ports

    Ethernet* (Passive PoE 24V-48V, 802.3af PoE 48V-56V). The NVW-150 can be powered from any DC 5- 20V DC Source (2 pin Lemo Pin 1 V-, Pin 2 V+, Pin 1 is closest to the red spot) or powered over Ethernet* (Passive PoE 9-24V).
  • Page 21: Power Output

    (to avoid a polarity mismatch). If an antenna is angled on one NVW unit it should also be angled on the other. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 22 (the receiving antenna). To make alignment easier both units can be connected when at close range allowing the LED Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 23 (because of the horizontal and vertical mismatch) Info When the antennas are at the same height, it is quite simple to align the antennas. However, when the antennas are at different heights, greater care has to be taken. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 24: Advanced Configuration

    1. Launch your Web browser (Internet Explorer, Firefox, Chrome etc.) 2. At the Address bar type in http://192.168.168.1 and press Enter on your keyboard. 3. At the login prompt, enter the User Name and Password. User Name: admin Password: password Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 25: Web Interface Navigation

    Clicking Save will write all configuration changes to flash. Clicking Discard will discard all current changes. Basic Wireless Select RADIO 1 to configure the high power backhaul radio or RADIO2 to configure the dual band secondary radio (NVW-250 only). Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 26 The Access Point Mode is the default mode of the device. In this mode the unit simply bridges the wireless clients to other wired and wireless network infrastructure. Devices in Station mode can connect to a device in Access Point mode. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 27 Repeater WDS This mode consists of a device in Station WDS mode and a device in Access Point WDS mode. The Repeater WDS must first link up with a Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 28 LAN. It should be specified while operating in Access Point or Access Point WDS mode. All the client devices within its range will receive broadcast messages from the access point advertising this SSID. Hide SSID: Once checked, this will disable advertising of the SSID of the Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 29 NG is 11n 2.4GHz band and represents a mix of 802.11n, 802.11g and 802.11b modes. Channel Spectrum Width 20M represents the data transmitted at a bandwidth of 20MHz. 20/40MHz represents the data transmitted at either 20MHz or 40MHz. In very noisy environments the NVW unit will automatically Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 30 2 minutes or more (possibly up to 10 minutes in some situations) for device to attempt to establish a connection. Auto: When checked, during startup the device will automatically select the least interfering channel (or frequency) for operation. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 31 You need to readjust the power level to in order to take advantage of the higher output power available. Maximum : checking this box will result in maximum TX output power overriding regulation. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 32 +3, +2, and +1. Station Parameters Settings The options below are only available in Station, Station WDS and Repeater WDS modes unless otherwise stated. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 33 Up to 4 MAC addresses can be entered. Priority is from top to bottom. In the event all preferred MAC addresses are not available the device will then pick the matching SSID access point with the strongest signal. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 34 20/40MHz represents the data transmitted at either 20MHz or 40MHz. In very noisy environments the unit will automatically fall back to 20MHz to be more resilient to the interference. In a situation when auto fall back does not happen, manually changing the channel Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 35 Maximum: checking this box will result in maximum TX output power overriding regulation. Obey Regulatory Power: checking this box will obey TX output regulatory power by country. Channel Scan List Check to enable Channel Scan List. Users can then mark and select Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 36 WPA or WPA2 Authentication WPAPSK PSK (Default): WPA or WPA2 with Pre-shared Key. Cipher Type TKIP: Temporal Key Integrity Protocol which uses RC4 encryption algorithm. AES: Advanced Encryption Standard (AES) algorithm. AUTO: Automatically select between both algorithms. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 37 WPA + EAP EAP – WPA or WPA2 with EAP (Extensible Authentication Protocol) Firmware supported options for clients are: EAP-TTLS, and EAP-PEAP Cipher Type TKIP - Temporal Key Integrity Protocol which uses RC4 encryption algorithm. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 38 Enter the Accounting Port number of the Radius Server. Default is 1813. Radius Secret Key Enter the Secret Key of the Radius Server. The device uses this to authenticate itself to the Radius Server. WPA EAP-TTLS and WPA EAP-PEAP Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 39 Password credential used by the wpa-supplicant for EAP authentication IEEE802.1x Settings The operation of the Keys is the same for ALL the modes. Note: Operating with IEEE802.1x security will limit the devices maximum wireless link speed 54Mbps. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 40 Enter the Radius Server Authentication Port number to use. Default is 1812 Accounting Port Enter Radius server Accounting Port to use. Default is 1813. Radius Secret Key Enter Radius server Secret Key that Access Point to use to Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 41 The operation of the Keys is the same for ALL the modes. Note: Operating with WEP security will limit the device to maximum wireless link speed of 54Mbps. Authentication Type: Open Authentication – (Default) No authentication. Recommend to use this standard option over shared authentication. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 42 For 128-bit – specify WEP key as 13 HEX (0-9, A-F or a-f) pairs (e.g. 00112233445566778899AABBCC) or 13 ASCII characters. Virtual Access Point (VAP) Virtual AP (VAP) implements mSSID (Multi-SSID) whereby a single wireless card can be setup with up to 3 virtual SSID of BSSID Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 43: Advance Wireless

    You may not use different secret keys for each VAP. Advance Wireless Click Advanced Wireless tab from the menu and select RADIO 1 or RADIO 2 to open the page below. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 44 Enter the distance in meters between both devices. Then click Calculate. The close approximate values for Slot Time, ACK Timeout, and CTS Timeout will be calculated to achieve the best possible performance and link reliability. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 45 2346 is optimum for most network use cases. Acknowledgement Timeout: The device has an auto-acknowledgement timeout algorithm which dynamically optimizes the frame acknowledgement timeout value without user intervention. This is a critical feature required for stabilizing long-distance outdoor links. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 46 Auto Adjust option for Point-to-Multipoint connections. Noise Immunity: Check to enable. When enabled the device will automatically adjust the noise to signal ratio for best performance. In low noise environments it is recommended to turn off this function. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 47 /receive on the left, middle or right port only. Selecting 2x2 Dual Chain will enable radio card to operate with 2 transmit and 2 receive streams and automatically transmit / receive on any of the 2 ports. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 48: Basic Network

    Click BASIC NETWORK from the menu bar to open the page as shown below. Network Mode: Bridging and Routing Network Mode: Select between Bridge (default) and Router mode. LAN Setup LAN Mode: Static: (default) lets you enter a specific IP address for the device. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 49 DHCP Relay: check to enable. Enter the IP address of the remote DHCP server where the DHCP Client request will be relayed to. DHCP Start IP Address: Enter the starting IP address to be issued. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 50 DNS requests. DHCP Reservations Click Add to enter each devices IP and MAC address. All active DHCP leases are displayed in the Status tab page from under the More Status selection. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 51 Bandwidth Control between Ethernet and Wireless An entry of value “0” means no bandwidth flow limit between the 2 interfaces. An entry of “2000” means 2000Kbit or 2Mbit limit traffic flow between the two interfaces. Default is “0” Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 52: Advanced Network

    Advanced Network Note: This tab will not be visible when in device is in Bridge mode, only in router mode. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 53 DMZ: Default is disabled. Check on box to enable. DMZ IP Address: Input the IP address of the local PC to receive the DMZ packets. Port Forwarding: Default is disabled. Check on box to enable. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 54 Adding an entry from Custom Server The Custom Server box lets you enter a new port number for an application or add new applications. Server Type: Enter a brief name for the application. Protocol: Select TCP or UDP Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 55 To open to only a specific range of IPs, select Range and enter IP address range. IP Forwarding: Default is disabled. Check on box to enable. Private IP: enter the local IP address to receive the forwarded Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 56 Router Info Protocol version: select RIPv1 or RIPv2 Firewall Setup Firewall Setup: Default is disabled. Check box to enable.. Comment: enter a brief name for the service. Policy: select Accept or Deny for the apply rule Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 57 Filtering Setup: Default is disabled. Check box to enable. DNS Redirection: Default is enabled. Check box to disable. When enabled the device will act as a DNS proxy. Devices connected to this device set their DNS IP to router’s IP address. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 58 Default is disabled. Check box to enable. When enabled, devices running UPnP services can automatically open certain specific ports. For security reasons this service should generally not be enabled, instead we recommend manually opening required ports through the port forwarding service. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 59: Services Tab

    Services Tab Click the Services tab from the menu to open the page below. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 60 Auto-Reboot Mode: Default is disabled. Select by Hour or By Time check. This mode lets you preset a timer to automatically force a reboot. The timer can operate on a fixed number of hours or at a specified time of day. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 61 Engine ID: Default is 800007e5BD00002704D000007c Enable SNMP Trap: Default is disabled. Check box to enable. Trap Destination IP: Enter the IP to send the info to when the trap is triggered. Community: Enter the SNMP community string. NTP Setup Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 62 HTTP(s) Port: Default is 80 for HTTP and 413 for HTTPs. Enter a new preferred port number. Telnet Access Setup Enable Telnet Server: Default is enabled. Uncheck box to disable. Server Port: Default is 23. Enter new preferred port number. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 63: System Tab

    Logging Port: Default is 514. Enter the new preferred port number. System Tab The System Page contains Administrative options. This page enables administrators to reboot the device, set it to factory defaults, upload a new firmware, backup or update the configuration and configure administrator’s credentials. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 64 3-7 minutes. The device will be un- accessible until the firmware upgrade routine is completed. It is highly recommended to back up the system configuration before uploading the new configuration. Close this window – button closes the firmware upgrade window. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 65 Administrator Username: specifies the name of the user. Current Password: the administrator is required to enter a current password. It is required for password or Administrator Username change routines. Default administrator login credentials: Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 66 Read-Only Username: new username for the read-only administrator should be specified. Password: new password used for the read-only administrator should be specified. Configuration Management Backup Configuration: click the Download button to export the current configuration to a file. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 67 Use only configuration backups of the same type device - configuration backed up from NVW-150 units are not compatible with NVW-250 units and vice versa. Device Maintenance The controls in this section are for performing device maintenance...
  • Page 68: Vlan Tab

    This page lets you create virtual local network connections through the devices Ethernet and wireless connections. By default VLAN mode is disabled (No Vlan is checked) VLAN Switch To setup a VLAN network check the Vlan Switch box Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 69 Tag VLAN ID or does not have the same VLAN ID setup. If this case use the devices Reset button to clear the config and reconfigure. Refer to the Reset button operations section. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 70 IP address, 192.168.168.20 if there is no entry in Vlan Management, there is no restriction. All computers can open the devices web page by the default IP address setup in Basic Network page. Datavideo Technologies Co., Ltd www.datavideo.info...
  • Page 71 Tel: +65-6749 6866 Fax:+65-6749 3266 Fax:+33-1-60376732 Tel: +86 531-8607 8813 E-mail:info@datavideovirtualset.com E-mail:service@datavideo.cn E-mail:info@datavideo.fr Please visit our website for latest manual update. www.datavideo.com/product/NVW-150 www.datavideo.com/product/NVW-250 All the trademarks are the properties of their respective owners. Datavideo Technologies Co., Ltd. All rights reserved 2018 Sep-22.2017...

This manual is also suitable for:

Nvw-250

Table of Contents