Entering A Frequency; Storing Stations Manually - Mercedes-Benz Audio 20 2012 Operating Instructions Manual

Radio mode
56
Selecting stations by entering the
frequency manually
Select Radio using the controller (slide
X
VÆ, XVY or turn cVd) and press W to
confirm.
Select Enter Frequency
X
confirm.
i
Only permissible numbers for the
frequency range can be entered in front of
the decimal point. If a non-permissible
number is entered after the decimal point,
the next lowest frequency is set.
Press the number keys on the number
X
keypad.
Audio 20 tunes in to the frequency.
Setting a station via the multifunction
steering wheel
In the audio menu in the instrument cluster:
X
press the 9 or : button briefly.
The next or the previous station from the
station list is set.
In the audio menu in the instrument cluster:
X
press and hold the 9 or : button for
longer than two seconds.
The previous or next station/channel in the
waveband will be set.
Storing stations

Storing stations manually

Ten stations can be stored for each
waveband.
i
and press W to
If a selected preset is already occupied,
the new station will be stored in place of
the old station.
Quick save: once you have selected the
X
main area, press and hold a number key
(0 to 9) until you hear a tone.
The station is now stored on the selected
preset.
Directly in the station memory: press
X
W the controller when the main area is
selected.
or
Select
X
VÆ, XVY or turn cVd) and press W to
confirm.
The station preset display appears.
The # dot in front of a preset position
indicates that the currently selected channel
is stored there.
To assign a new preset: slide ZVÆ or turn
X
cVd the controller and press W until you
hear a tone.
or
Press and hold a number key (0 to 9) on the
X
number keypad until you hear a tone.
The station is now stored on the selected
preset.
Presets using the controller (slide