Tty Operation - Motorola V323i Motomanual

Find it: Press r > w Settings > Connection
> Bluetooth Link > Handsfree > [Lookf For Devices]
Your phone displays a list of device(s) located
within range of the phone. If your phone is
already connected to a device, your phone
lists that device and identifies it with a \
(in-use indicator). Once a connection is
established with a device, no other device can
connect to your phone until the currently
connected device is disconnected.
1 Highlight a device in the list of devices
your phone found.
2 Press r to connect the device.
3 If the device requests permission to bond
with your phone, select YES and enter the
device PIN code to create a secure
connection with the device.
Note: The default PIN code is 0000.
22 main attractions
When the connection is made, the à
(Bluetooth) indicator or a Bluetooth message
displays in the home screen.
For specific information about an accessory,
refer to the instructions that came with it.

TTY operation

You can use an optional TTY device with your
phone to send and receive calls. You must
plug the TTY device into the phone's headset
connector and set the phone to operate in
one of three TTY modes.
Note: Use a TSB-121 compliant cable
(provided by the TTY manufacturer) to
connect the TTY device to your phone.
Note: Set the phone to level 4 (middle setting)
for proper operation. If you experience a high
number of incorrect characters, adjust the
volume as needed to minimize the error rate.