Table of Contents
Advertisement
Previous Start Point
The Previous start point destination entry method allows
you to select the last start point as a destination.
Home
The home destination entry method allows you to
choose home as a destination. Use the joystick to select
the home symbol from the bottom of the Destination
screen. Besides preset destinations 1 through 5, home
is the only preset available for selection while the
vehicle is moving.
Preset Destination
The Preset destination entry method allows you
to select destinations that were registered as
presets 1 through 5. Use the joystick to select from
the numbered presets at the bottom of the Destination
screen. Besides the home preset, these are the only
presets available for selection while the vehicle
is moving.
Map
The Map destination entry method displays the last
location on the map, and the road preference.
Using the joystick, scroll across the map to the location
you would like to set as your destination. Once you
have located the desired destination, press the joystick
to select it. The route will then be calculated, and
you will hear a voice prompt directing you to "Proceed
to the highlighted route." If you do not hear a voice
prompt, your voice guidance prompts may have been
turned off. See "Voice Volume" under Setup Menu
on page 2-4 for more information.
You may also zoom out to view the entire regional map.
See "Hard Keys" under Using the Navigation System
on page 2-2 for more information. However, if you zoom
out as much as possible and scroll around the map,
some parts of the map will appear to be missing
because they are not readable in larger scales.
2-23
Advertisement
Table of Contents
