Hide thumbs Also See for VIBE 2005:
Table of Contents

Advertisement

You can also choose Set dealer from the Maintenance
screen. Here you can register your dealer's name
and address. When complete, the map location of the
dealer will be displayed.
You can also edit your dealer's name, location, and
phone number if you have already registered the dealer.
After you select Set dealer from the Maintenance
screen, the Edit dealer screen will appear. Select
Change to edit dealer information. You may also select
Delete dealer to delete the current dealer information.
Display Off
To turn the navigation screen off, press the Disp.
OFF key. To turn the screen back on, press any
hard key to the left of the navigation screen.

Maps

This section includes basic information that you need to
know about the map database.
The maps are stored on a DVD-ROM. The
48 contiguous United States and portions of Canada
are contained on one disc. The U.S. map database
includes interstate freeways, state highways, country
roads, and major and general streets.
2-8
Refer to the "Navigation System Map Disc" manual to
view the explanation of map coverage. The map
disc manual will be in your map DVD case when the
vehicle is delivered from the factory.
When your vehicle is delivered from the factory, the
dealer may have installed the map DVD. If the DVD was
not installed in your vehicle when first purchased, do
the following:
1. Turn the ignition on.
2. If already loaded, eject the map DVD or audio CD
from the slot.
3. Load the map DVD into the slot by inserting it
partway. The system will pull it in.
Once the DVD is inserted correctly, you will have the
following two choices:
ENG (English)
FR (French)
You can select the language at this time. See
"Language" under Setup Menu on page 2-4 for
more information on choosing a language. Once a
language has been selected, select I AGREE to plan
a route. The map will appear showing your current
vehicle position.

Advertisement

Table of Contents
loading

Table of Contents