Table of Contents
Advertisement
Cable requirements:
• Cable No. 1-4: DC Plug Cable built into the RMK-6 (Cable 1 & 2: 85 CM, Cable 3 & 4: 45 CM)
• Cable No. 5: HDMI Cable (50 CM)
• Cable No. 6: HDMI Cable (50 CM)
• Cable No. 7: HDMI Cable (100 CM)
• Cable No. 8: BNC 180 degree Cable (80 CM)
• Cable No. 9: BNC 180 degree Cable (80 CM)
• Cable No. 10: Ethernet Cable (40 CM)
1. Connect one end of Cable No. 10 (Ethernet Cable) to LAN OUT on the rear panel of the NVS-25
and another end to the RMK-6 RACK's RJ-45 Port on the inner side as indicated by the arrow
shown in the diagram below.
2. Connect one end of Cable No. 9 (80CM BNC Cable) to NVS-25 SDI IN and another end to
102 SDI OUT 2.
How to Connect Internal Cables
10
9
8
TLM-
Advertisement
Table of Contents
