Samsung GT-E2652W Service Manual page 25

7. Level 2 Repair
7-1-1. Assembly
1) Solder the RECEIVER FPCB & the MOTOR wire
1
from PBA.
1) Solder the RECEIVER FPCB & the MOTOR wire from PBA.
（ Caution
1) Be care of the RECEIVER FPCB and MOTOR wire damage.
3
1
) Assemble the SHIELD CAN.
2) Assemble the INTENNA.
1) Assemble the SHIELD CAN.
2) Assemble the INTENNA.
（ Caution
1) Be care of damage to INTENNA PATTERN and PBA.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
1) Assemble the CAMERA MODULE & the DUAL
2
SOCKET BRACKET to PBA.
2) Assemble the MOTOR from the DUAL SOCKET
BRACKET.
1) Assemble the CAMERA MODULE & the DUAL SOCKET
BRACKET to PBA.
2) Assemble the MOTOR from the DUAL SOCKET BRACKET.
（ Caution
1) Be care of damage to CAMERA MODULE and SOCKET.
4 1) screw the 2 points.
1) screw the 2 points.
（ Caution
1) Be care of scratch and PBA damage.
2) Torque : 1.0 ~ 1.2 Kgf·cm
7-4