Porsche 911 Carrera Owner's Manual page 225

10. Swivel front locking lever G to the rear. The
latching hook H must engage in the windshield
frame (arrow). The white marking line J on the
red locking button must become visible when
the hardtop is locked properly.
11. Push on plastic cover of the front hardtop lock.
12. Tighten the fastening screw by hand. Then
tighten the fastening screw with the unlocking
handle D (tightening torque 34 ft.lb. (46 Nm)).
13. Repeat procedure on the other side of the
hardtop.
14. Fit both plastic covers C into the trim panels of
the rear hardtop locking elements so that the
marking points are opposite each other.
15. Store unlocking handle in storage tray
between the front seats.
Mobile Roofs
223