Recording Tuner /Aux; Basic Recording; How To Find Your Recording - Philips WACS700 User Manual

Recording in TUNER/AUX modes
Record up to a maximum of 3 hours for each Aux/Radio recording.
Depending on your recording file size(s), this is sometimes stored in temporary folder called Raw tracks
for background encoding.
Basic recording controls
1
Select the source you want. (see the respective chapter, Recording from Tuner or Recording
from AUX)
2
Press RECORD at the point where wish to start recording.
3
To pause recording, press OK (or
4
To stop recording, press STOP/
Display: Rec...disappears.
If you exceed the limit, the display shows: Max 3 hour recording reached.
recording and recording will automatically end.
Hard disc full is displayed if there is insufficient space on your harddisk.
Tip
When recording is in progress, you can only operate:
STOP/
the sound controls: DBB, IS, VOL +/- and MUTE.
Display shows Function is not available if you press any other controls.

How to find your recording

When recording is finished, your recording is assigned a recording number (XXX) according to your
source: RADIO_XXX or AUX_XXX with default album, artist & genre information if available for AUX
sources.
To listen to your recording, select HD source. Navigate through All tracks to find.
-
If you have recorded a large number of tracks/ large audio files, theses will be stored under Raw
-
Tracks. This is where recordings are temporarily before compression is fully processed.
37
II / on the remote control). Press again to resume recording.
.
Abort