Table of Contents
Advertisement
Chapter 3-Basic Operation
Viewing Permissions
3-8
•
The High Port Usage threshold.
Total Allocated Video Ports (CIF resolution) In System
Video Ports In Use
Video Port Usage Indicator
Total Allocated Audio Ports In System
Audio Ports In Use
Audio Port Usage Indicator
Audio and Video High Port Usage Threshold
The High Port Usage threshold represents a percentage of the total
number of video or voice ports available. It is set to indicate when
resource usage is approaching its maximum, resulting in no free resources
to run additional conferences. When port usage reaches or exceeds the
threshold, the red area of the gauge flashes and a System Alert is
generated. The default port usage threshold is 80% and it can be modified
by the system administrator. For more information, see the RMX 1500/
2000/4000 Administrator's Guide, "Port Usage" on page 18-62.
MCU State
The MCU State indicator displays one of the following:
•
the system start-up is complete is displayed between brackets while a
green progress indicator bar indicates the start-up progress.
Progress Indicator Bar
•
•
could be affected and attention is required.
– The MCU is starting up. The time remaining until
– The MCU is functioning normally.
– The MCU has a major problem. MCU behavior
Time Remaining
Advertisement
Table of Contents
