Renault MEGANE User Manual page 48

CHILD SAFETY: choosing a child seat mounting
2
Attachment using the ISOFIX
system
The two rings 1 are located between
the seatback and the seat base of the
seat and are identified by a marking. To
position and lock the child seat on the
rings 1, insert the child seat mountings
in the access guides 2.
The ISOFIX anchorage points have been exclusively designed for child
seats with the ISOFIX system. Never fit a different type of child seat, seat
belt or other objects to these anchorage points. Check that nothing is ob-
structing the anchorage points.
If your vehicle has been involved in a road accident, have the ISOFIX anchorage
points checked and replace your child seat.
1.42
1
3
The third ring 3 or 4 is used to attach
the upper strap on some seats ISOFIX.
(3/4)
The rings are located on the rear seat-
backs and indicated by the symbol
In all cases, attach the strap hook to the
corresponding ring 3 or 4 and place the
seat in the desired position.
Pull the belt so that the back of the child
seat comes into contact with the back
of the vehicle seat.
4
seat. In this case, the child seat may
not always rest on the seat base of
the vehicle seat.
mounting point.

Check that the seatback
of the forward-facing child
seat is in contact with the
seatback of the vehicle
The child seat strap must
be attached to the corre-
sponding ring.
Do not use any other
.