Renault MEGANE User Manual page 172

CRUISE CONTROL
a
3
2
5
b
Putting the function on
standby
The function is set to standby if you:
– use the switch 5 (O);
– the brake pedal;
– depress the clutch pedal or the shift
into neutral if the vehicle has an au-
tomatic gearbox.
The cruising speed is stored and dis-
played on the instrument panel accom-
panied by the message "Memorised".
Standby is confirmed by displaying of
cruising speed in grey and the mes-
sage "Memorised" and depending on
the vehicle the indicator light
out.
2.60
(4/4)
Returning to the cruising speed
If a speed is stored, it can be recalled,
once you are sure that the road con-
ditions are suitable (traffic, road sur-
face, weather conditions, etc.). Press
switch 3 (R) if the vehicle speed is
above 20 mph (30 km/h).
When the stored speed is recalled,
activation of the cruise control is con-
firmed by displaying of the cruising
speed along with the message "Cruise
control" and, depending on the vehicle,
lighting of the indicator light
NB: if the speed previously stored is
much higher than the current speed,
the vehicle will accelerate more rapidly
to reach this threshold.
When the cruise control function is
put on standby, pressing switch 2
side a (+) reactivates the cruise

control function without taking into
going
account the stored speed: it is the
speed at which the vehicle is moving
that is taken into account.

.
Switching off the function
The cruise control function is deacti-
vated if you press switch 1: in this case
a speed is no longer stored. The switch-
ing off, depending on the vehicle, of the
green indicator light
indicator lights
associated message on the instrument
panel confirm that it is off.
Putting the cruise control
on standby or switching it
off does not cause a rapid
reduction in speed: you
must brake by depressing the brake
pedal.
1

or of the green
 
and , and of the