Seat Memory - Porsche 911 Turbo Driver Manual

M - Memory button
1 Key button
2, 3 - Person buttons

Seat Memory

Individual seat and door mirror settings can
be stored and recalled for the driver's position.
You cannot store the position of the side bolsters
for the adaptive sports seat.
Further individual setting options are available in
vehicles with the Sport Chrono Turbo package.
f Please observe the chapter "Individual
Memory" in the separate PCM operating
instructions.
26
Controls, Safety
d
Warning!
Risk of crushing due to uncontrolled recall
of a seat setting.
f Cancel automatic adjustment by pressing any
of the seat adjustment buttons.
f Do not leave children in the vehicle unattended.
Operation with person buttons 2, 3
Storing seat position
1. Switch ignition on.
Reverse gear must not be engaged.
2. Set the desired seat and door mirror positions.
3. Press and hold memory button M and person
button 2 or 3 until an audible signal confirms
that the position has been stored.
The individual setting is now stored under the
desired person button.
Recalling seat position
The seat position can only be called up when
the vehicle is at a standstill.
1. Switch on the ignition or
open the driver's door.
2. Press person button until the seat has reached
its final position.
The door mirror and the lumbar support
settings will be completed even if the person
button is not kept depressed.
Note
Automatic seat adjustment can be interrupted
immediately by releasing the button.