Led Schedule; Table 8: Leds - Grandstream Networks GWN7600LR User Manual

GWN7600LR Access Points series support also the LED schedule feature. This feature is used to set the
timing when the LEDs are ON and when they will go OFF at customer's convenience.
This can be useful for example when the LEDs become disturbing during some periods of the day, this way
with the LED scheduler, you can set the timing so that the LEDs are off at night after specific hours and
maintain the Wi-Fi service for other clients without shutting down the AP.
To configure LED schedule, on the GWN7600LR WebGUI navigate to "System SettingsLEDs".
Following options are available:
Field
LEDs Always Off
Schedule Stop Hour
Schedule Start Hour
Schedule Stop Minute
Schedule Start Minute
Schedule Weekdays list
of schedule days
Following example on the next page sets the LEDs to be turned on from 8am till 8pm every day.

LED SCHEDULE

Table 8: LEDs

Description
Configure whether to disable the AP LED dictator
Configure the hour the AP LED dictator is disabled. The valid range is from
0 to 23. And the value cannot be empty.
Configure the minute the AP LED dictator is disabled. The valid range is
from 0 to 59.
Configure the hour the AP LED dictator is enabled. The valid range is from
0 to 23. And the value cannot be empty.
Configure the minute the AP LED dictator is enabled. The valid range is
from 0 to 59.
Select the days the AP LED is desired to be disabled or enabled.
GWN7600LR User Manual
P a g e | 43