Placing And Ending An Audio-Only Call - Polycom V500 Getting Started Manual

G S G
ETTING TARTED UIDE FOR THE

Placing and Ending an Audio-only Call

Placing an Audio-only Call
Ending an Audio-only Call
8
V500 S
YSTEM
If you have an ISDN line connected to your V500, you can use your system to
make audio-only calls in addition to using your system to place video calls.
To place an audio-only call from your system:
1. On the Place a Call screen, enter the number you want to call.
To place a call within your PBX system, enter the last four digits of the
number.
To delete a digit, press
2. Press Call to place the call.
To hang up from an audio-only call:
>>
Press Hang Up on the remote control.
If the person on the telephone hangs up first, you need to disconnect the call from the
V500 system, just as you would hang up a telephone receiver in a regular phone call.
Delete on the remote control.
.
WWW POLYCOM
. /
COM VIDEODOCUMENTATION