Replace The Plasma Panel (Finished) - Panasonic TH-42PZ77U Service Manual

5. Remove the screws (×2
6. Disconnect the connector (S2) and Remove the S-Board.
7. Remove the screws (×2
8. Disconnect the connectors (K1 and K2) and remove the K-
Board.
).
).
6.24. Replace the plasma panel
(finished)
1. Place the new plasma panel (finished) on the flat surface of
the table (covered by a soft cloth), with the plasma panel
surface facing downward.
2. Attach the C1, C2, C3-Board and the C4-Board, connect
the flexible cables (×30) from the Plasma panel to the C1,
C2, C3-Board and the C4-Board, and fit the flexible cable
holders.
3. Attach the Hooks (left, right) and fit the stand brackets (L,
R) to the new plasma panel.
4. Place the plasma panel section on the servicing stand.
5. Attach the cabinet assy and each P.C.Board and so on, to
the new plasma panel.
* When fitting the cabinet assy, be careful not to allow
any debris, dust or handling residue to remain between
the front glass and plasma panel.
17
TH-42PZ77U