5. Remove the screws (×6
6. Remove the molding props (×11
7. Remove the P-Board.
Note:
When assembling the P-Board, the position of each hole of
the insulation sheets(A, B) is set to the position of each hole
of the P-Board and then assemble them. (
indicate setting positions.)
).
).
marks
6.8.
Remove the side AV unit and
the side AV bracket.
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (G51 and GS52) and relay
connector.
3. Remove the screws (×4
4. Remove the side AV unit.
5. Remove the screw (×1
11
).
).
TH-42PZ77U