Table of Contents
Advertisement
Problem
O flashes on the
• If the camera clock has not been set, O flashes
screen.
on the shooting screen, and images and movies
saved before the clock is set are dated "00/00/
0000 00:00" and "01/01/2015 00:00" respectively.
Set the correct time and date for Time zone and
Date and time of
date in the setup menu.
recording are not
• The camera clock is not as accurate as ordinary
correct.
watches or clocks. Periodically compare the time
of the camera clock with that of a more accurate
timepiece, and reset as required.
No indicators
Hide info is selected for Photo info in Monitor
displayed in
settings in the setup menu.
monitor.
Date stamp not
Time zone and date has not been set in the setup
available.
menu.
Date not stamped
• The current shooting mode does not support
on images even
Date stamp.
when Date
• The date cannot be stamped on movies.
stamp is enabled.
Screen for setting
time zone and
date is displayed
The clock battery is exhausted; all settings were
when the camera
restored to their default values.
is turned on.
The camera
settings reset.
When Autofocus mode is set to Full-time AF or
The camera
while in some shooting modes, the camera may
makes sound.
produce an audible focusing sound.
Shooting Issues
Problem
Cannot switch to
Disconnect the HDMI cable or USB cable.
shooting mode.
• When the camera is in playback mode, press the
A button, shutter-release button, or b (e) button.
Cannot take
• When menus are displayed, press the d button.
pictures or record
movies.
• The flash is charging while the flash lamp is flashing.
• The batteries are exhausted.
Cause/Solution
Cause/Solution
A
3, 107
109
107
111
9, 11
20, 102
A
122
1, 17
75
44
7, 134
141
Advertisement
Table of Contents
