Usage Guidelines; Docking Cradle And Handset Led Indicators - Polycom CX400 User Manual

User Guide Polycom CX400 Cordless Phone
Note

Usage Guidelines

Docking Cradle and Handset LED Indicators

1 - 10
be the device for the Sounds setup page. Otherwise ensure that your
PC sound output device is selected.
Check Finish to exit the wizard.
d
Contact your system administrator to ensure your account is configured in
Enterprise Voice mode.
To navigate through menus, to enter data, and instructions on how to use
Microsoft Office Communicator 2007, refer to the Microsoft Office
Communicator 2007 help and documentation.
The Polycom CX400 cordless phone cradle has two LEDs that provide
information about battery charging and connection status. The handset has an
LED that indicates the state of the handset. The various states and
interpretations are described in the following table.
LED
Cradle Red Charging
LED
Cradle Green
Connection LED
Handset Status LED
State Description
Off The handset is fully charged or cradle is not
receiving power.
On The handset is charging.
Off The cradle is not receiving power (USB cord
may be unplugged or the computer may be
turned off).
On The cradle is powered and radio frequency
link is established with handset.
Slow There is no radio frequency link between
Flashing handset and cradle (the handset may be
off).
Fast The cradle is attempting to "pair" with the
Flashing handset (the handset may be off).
Off The handset is off whether it is in the cradle
or not.
Green The handset is on whether it is in the cradle
or not.
Flashing The handset battery is low (when handset is
Red out of cradle).