Cycles At A Glance - Maytag DW-2 User Manual

Cycles at a Glance
eeeoeooeeo oeeeeooeoleeeQooeeeooeeoeg eeeoeeo ooeoo
........ I ........ I ........ j ................ OLD OFF D........
ON fl ......... fl ...... __
WICK WASH / RINSE - POTS & PANS
D SD SD ..........
_a_'t_EA G JETCLEA N DISHWASHER o SUPER CAPACITY- QUIET _#_ , _y_linse
Number of buttons and indicator lights varies dependingon model.
Your dishwasher features several cycles and options to clean and dry a variety of loads. The following information
will help you select the appropriate cycle and options for each situation.
Cycles Options
Located around the knob on the right side of the panel. Located on the pads on the left side of the panel.
Pots & Pans provides temperature checks in the main
CYCLE SEQUENCE WATER
USAGE
wash and final rinse. If necessary, the cycle is inter-
rupted to heat water to the proper temperature; the
Pots & Pans provides a Prewash HEATING DELAY light is illuminated during this
longer cycle for items Prerinse time. Use the Pots & Pans option to aid in removing
with heavy food soils. Main Wash 10.3 Gal. tough food soils.
Prerinse
Hi-Temp Rinse Sani Heat (8 pad models) checks the main wash and
Dry final rinse temperature. If necessary, the cycle is inter-
..............................,............................... rupted to heat water to the proper temperature; the
Normal Wash is Prewash HEATING DELAY light is illuminated during this
designed to wash loads Main Wash 8.2 Gal. time. This option also provides additional heated dry
containing dishes with Prerinse time. When this option is selected with the Quick
normal amounts of food Hi-Temp Rinse Wash/Rinse cycle, additional heat is automatically
soils. Dry added to the wash and there is NOT additional dry
................................ •........ . .......... . ........ time. Use Sani Heat to aid in the removal of tough,
Light/China is designed Main Wash more difficult to remove food soils (such as starches
for washing lightly Prerinse 6.1 Gal. and fats) and to boost drying results.
soiled loads or china and Hi-Temp Rinse Temp Sense ensures proper water temperature when
crystal items. Dry using the Pots & Pans, Normal, or Light/China cycles.
Quick Wash/Rinse is Wash If needed, the wash or rinse portions of the cycle are
extended until a proper water temperature is reached.
designed for use when Rinse 3.7 Gal. When the wash or rinse portions of the cycle are being
lightly soiled dishes are extended, the HEATING DELAY light is illuminated.
needed in a hurry. Use this option if the incoming water temperature is
Rinse & Hold is for Rinse below 120 ° F (49° C) due to other househoM demands
rinsing dishes being held such as showers and laundry.
until the dishwasher is 1.9 Gal.
Heated Dry ON improves drying results by turning on
full. This helps reduce the heating element during the dry portion of the cycle.
the potential for odors.
....................................... Heated Dry OFF turns the heating element off during
Delay Start allows you to program the dishwasher to the dry portion of the cycle. Towel drying of some
operate at a more convenient time or during off-peak items may necessary with this selection and more
energy rate hours. Simply turn the cycle selector knob moisture may be noticed on the dishwasher interior.
to the desired number of delay hours and latch the door. Note: V_qth either dry option, it is normal to notice
Note: For 0Pthnal cleaning _d drying results, hot vapor coming out of the vent area.
wateris nece_ary t0 activate detergent and to break
I
down greasy food soils:
, ,
8