Connecting The 3D Woofer (Kv-Xa25M83 Only) - Sony Trinitron KV-XA29 Operating Instructions Manual

Connecting the 3D WOOFER
(KV-XA25M83 only)
You can enjoy high quality sound by connecting the 3D WOOFER.
1
Corner A
1
Align the front of the 3D WOOFER to corners A and B of your TV. Place the
3D WOOFER into the footholds and adjust it until it is stable.
2
Connect the wires to the 3D WOOFER (8Ω) terminals at the rear of your TV.
The red wire should be connected to the 3 red terminal and the black wire
to the # black terminal.
6
Using Your New TV
3D WOOFER
Corner B
R L Y C B C R
WOOFER
(8Ω)
1 2 3
L(MONO)
R
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may
malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make
sure that none of the 3D WOOFER wire strands stick out, making contact
with the neighbouring speaker terminal.
2
Red wire
Black wire