Step 2: Insert The Batteries Into The Remote; Step 3: Preset The Channels Automatically - Sony Trinitron KV-XA29 Operating Instructions Manual

Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a VCR to the (antenna) terminal, preset the signal output
• If both
• Do not connect video equipment to the t 3 (video input) jacks at the
• When no signal is input from the connected video equipment, the TV
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries nor use different types of batteries together.
Step 3
Preset the channels automatically
Front of TV
L(MONO) ENTER SELECT
3 MENU AUTO PROGR
PROGR
Tips
• If you want to stop the automatic channel presetting, press MENU.
• If your TV has preset an unwanted channel or cannot preset a particular
Note
• During automatic channel presetting, your TV screen will indicate "B/G",
jack) and the black plug to -L (MONO) (the white jack).
from the VCR to the program number 0 on the TV.
(S video input) and t 1 (video input) at the rear of your TV
are input at the same time, the
selected. To view the video input to t 1 (video input), disconnect the
S video cable.
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
screen becomes blue.
1
2
channel, then preset your TV manually (see page 25).
"I", "D/K" or "M" for the TV system ("TV SYS").
(S video input) is automatically
Using Your New TV
(the yellow
5