Table of Contents
Advertisement
Model BR777
PROGRAMMING THE VOX (HANDSFREE TRANSMISSION)
Your BR777 radio has 3 VOX level settings (oF/1/2/3).
In the PROGRAM mode, press the MODE button until the VOX icon
appears while the current VOX setting appears on the right.
Press the
\
setting.
Press and hold the PTT button to confirm or press MODE button
again to continue programming.
!
Note : VOX will be more sensitive on the "1" setting than on the "3"
setting. Selecting "0" will disable the VOX function.
CLONING THE RADIO SETTINGS
You can copy the BR777 radio settings from one radio (SOURCE) to
a another BR777 radio (TARGET) by using a Cloning Cable
(included).
To clone the radios:
Set both the SOURCE and TARGET radio into PROGRAM mode.
Press the MODE button of both radios until the CLONE icon (shown
as "CLON") appears on the right, and below a "CL" is shown.
Press the
button of the SOURCE radio and the TX icon will appear.
Press the
button of the TARGET radio and the RX icon will appear.
Attach the Clonic Cable on both radios.
Press again the
segments blinking in sequence in the LCD display.
Press again the
segments blinking in sequence in the LCD display.
Once the cloning process is done, a "P" will appear on the display.
Remove the cloning cable from the radios.
Exit the cloning process by pressing the MODE button for more than
3 seconds until the unit is powered off.
Page 14
button to select between "0", "1","2", or "3" VOX
button of the TARGET radio and you will see 4
button of the SOURCE radio and you will see 4
www.midlandradio.com
®
Advertisement
Table of Contents
