Foreword; Product Profile; Lcd; Scanning Frequencies - Philips 220E1SB/00 Service Manual

84 Meridian 1

1. FOREWORD

This specification describes a 21.5" FHD multi-scan color TFT LCD monitor with maximum resolution up to 1920 x
1080/75Hz non-interlaced.
All optical characteristics (including White-D, Brightness and so on) are determined according to panel specification
after warming up approximate 30 minutes that brightness stability is optimal, and follow strictly after panel
specification.

2. PRODUCT PROFILE

This display monitor unit is a color display monitor enclosed in Philips styling cabinet which has an integrated tilt
base.

LCD

Priority: 1. CMO M216H1-L01
Type: TN
Suppliers to offer the panel specification.
Panel incoming specification: Follow Philips' specification.
CMO M216H1-L01
Type NR.
Resolution
Outside dimensions
Pitch (mm)
Color pixel arragnement
Display surface
Color depth
Backlight
Active area (W xH)
View angle (CR>10)
Contrast ratio
White Luminance
Color gamut
Gate IC
Source IC
Response time
Vertical frequency range

Scanning frequencies

Hor.
Ver.
Video dot rate
Power input
Power consumption
Functions:
: M216H1-L01
:1920 x 1080 (FHD)
:499.5 (H) x 292.6 (V) x 17.0 (D)mm (Typ.)
:0.248 mm x 0.248 mm
: 1920 horizontal By 1080 vertical Pixels. RGB stripe arrangement
:Hard coating (3H), Anti-glare treatment of the front polarizer
:16.7M colors
:4CCFL
:477.50 (H) x 268.59 (V)
: R/L 170(Typ.), U/D 160(Typ.)
:1000:1 (Typ.) 700:1 (Min)
: 300cd/m2(Typ) 250(Min)
:>=72%
:
:
:5ms (Typ.) 8ms (Max)
:58.1~85Hz
: 30 – 80 KHz
: 56 - 76 Hz
: <205 MHz (analog), EDID: 170MHz
<165 MHz (digital), EDID: 170MHz
: 90-264 V AC, 50/60 ± 2 Hz
: 40W (typ.), < 42 W maximum