Parts Identification - Sony URX-P03D Operating Instructions Manual

Parts Identification

Front
Top
Bottom
a Antennas
b POWER indicator
Displays the battery level and charging status.
Indicator display Status
On (green) Sufficient battery level
Flashing (green) Battery is getting low
On (orange) Charging (when rechargeable nickel
metal hydride batteries are inserted
and power is turned off)
Indicator display Status
Flashing (red) Charging not possible (when batteries
other than rechargeable nickel metal
hydride batteries are inserted or the
nickel metal hydride batteries are
deteriorated)
Note
Disconnect the USB cable, and
replace the batteries.
Off Power is off or battery is empty
c RF (radio frequency) indicators
Indicate the RF input level of tuner 1 and tuner 2.
On in green: 25 dBµ or more
On in red: 15 dBµ to 25 dBµ
Off: Less than 15 dBµ
0 dBµ = 1 µV
EMF
d Infrared transmission port
Transmits the frequency and compander mode settings
configured on the unit to the transmitter.
e + or – button
Use to select a function or value.
f Battery compartment
Accepts two AA batteries (alkaline, nickel metal hydride,
or lithium batteries).
For details on how to insert batteries, see "Power
Supply" (page 6).
g Display section
Meter screen
A Audio input level meter
Indicates the input signal level.
B Peak indicator
Warns of excessive input by lighting up when the signal
is 3 dB below the level at which distortion begins.
C Group display
Displays the name of the receive group that is configured.
D Channel display
Displays the name of the receive channel that is
configured.
4