Basic Menu Operations; Utility Menu - Sony URX-P03D Operating Instructions Manual

Basic Menu Operations

Menu name
Item to be set
1
Press the MENU button repeatedly to select the
menu.
Each time you press the MENU SELECT button, the
menu changes in the following order:
meter screen, RX1, RX2, EXT.IN, meter screen
If you want to configure settings in the UTILITY
menu, display the meter screen.
2
Press the + or – button repeatedly until the function to
be set appears.
3
Hold down the SET button until the item to be set
flashes.
4
Press the + or – button to change the setting.
5
Press the SET button to apply the setting.
Note
When the tuner is turned off, the menus corresponding to
that tuner are not displayed.

UTILITY Menu

The UTILITY menu includes items related to the basic
receiver settings, including the meter screen.
These functions and parameters are explained here.
Underlined items are the factory setting.
Adjusting the monitor audio level
(PHONES)
Adjusts the monitor audio level for the headphones.
The factory default setting is 12.
For details, see "Adjusting the Monitor Audio Level"
(page 12).
Function name
13
Setting the audio output level (OUT
LEVEL)
Sets the audio output level. You can set the level in 3 dB
increments in the range –12 dB to +12 dB. The factory
default setting is 0 dB.
Note
The monitor output level does not change when you
change the output level in OUT LEVEL. The monitor
output level is adjusted separately.
For details about adjusting the monitor audio level, see
"Adjusting the Monitor Audio Level" (page 12).
Displaying the accumulated running time
(TIME)
Display the accumulated running time of the unit as a
guide to total usage time.
The factory default setting is 00:00. Up to 99:99 can be
displayed.
To reset the time display
1
Press and hold the SET button until the time display
starts flashing.
2
Press the – button to display "00:00 CLR" and press
the SET button.
Pressing the + button when "00:00 CLR" is displayed
causes the time display to start flashing. You can
press the SET button in this state to cancel the reset of
the accumulated running time.
Selecting the preferred power supply
(PWR SOURCE)
Specifies whether the power supply from the batteries
inserted in the unit or from an external USB portable
power supply or accessory connected to the USB
connector or auxiliary connector has precedence.
BATT -> EXT: Batteries inserted in the unit have
precedence.
EXT -> BATT: Power supplied from a USB connector or
externally connected sources have precedence.
BATT ONLY: Batteries inserted in the unit are used, and
power supplied from the USB connector or auxiliary
connector is not used even after the batteries are
discharged.
Note
When BATT -> EXT or EXT -> BATT is specified and
power from the preferred source is cut off, the power
supply automatically switches to the other source.
Therefore, when only one power supply is available, that
power supply will be used regardless of the PWR
SOURCE setting. There may be a brief interruption in the
audio when the power supply switches.