Installing The Nvme Ssd; Wlan Card; Removing The Wlan Card - Dell Latitude 7389 Owner's Manual

Installing the NVMe SSD

1 Insert the NVMe SSD card into the connector.
2 Install the thermal bracket over the SSD card.
3 Tighten the M2.0 x 3.0 screws to secure the SSD thermal bracket.
4 Install the:
a battery
NOTE:
b base cover
c MicroSD card
5 Follow the procedure in

WLAN card

Removing the WLAN card

1 Follow the procedure in
2 Remove:
a MicroSD card
b base cover
c battery
NOTE:
3 To remove the WLAN card:
a Remove the M2.0 x 3.0 screw that secures the metal bracket to the WLAN card [1].
b Lift the metal bracket [2].
If you have not removed the battery, you must connect the battery cable to the system board.
After working inside your computer.
Before working inside your
You need not remove battery, instead you can disconnect the battery cable from the system board.
computer.
Removing and installing components 13