Error Messages; Main Specifications - Roland SYSTEM-8 Owner's Manual

Error Messages

Message Meaning
The SD card is not
inserted, or is inserted
incompletely.
The SD card was
SDCard
removed after you
NotReady!
selected data that was
on the SD card.
The format of the SD
card is invalid.
Data could not be
read from the SD card.
Read Error!
The file is damaged.
Data could not be
written to the SD card.
Write Error!
The format of the SD
card is invalid.
There is insufficient
SD Card Full!
space on the SD card.
The contents of the
Sys Mem
SYSTEM-8's save area
Damaged!
may be damaged.
An unusually large
amount of MIDI
MIDI Buff Full! data was received,
and could not be
processed.

Main Specifications

Roland SYSTEM-8: PLUG-OUT Synthesizer
Key
49 keys (with velocity)
Power
AC adaptor
Supply
Current
2 A
draw
881 (W) x 364 (D) x 109 (H) mm
Dimensions
34-11/16 (W) x 14-3/8 (D) x 4-5/16 (H) inches
Weight
5.9 kg
(excluding
13 lbs 1 oz
AC adaptor)
Accessories Owner's manual, AC adaptor, Power cord
Keyboard stand: KS-18Z (*)
Pedal Switch: DP series
Options
Expression Pedal: EV-5
* When using the KS-18Z ensure that the height of the
unit is one meter or lower.
* In the interest of product improvement, the specifications and/
or appearance of this unit are subject to change without prior
notice.
22
Action
Turn off the unit, firmly
insert the SD card, and then
turn on the unit once again
(p. 8).
Use the SYSTEM-8 to format
the SD card (p. 20).
Make sure that the SD card
is correctly inserted.
Do not use this file.
Make sure that the SD card
is correctly inserted.
Use the SYSTEM-8 to format
the SD card (p. 20).
Delete unneeded data.
Execute the factory reset
operation (p. 21).
If this does not solve the
problem, contact your
dealer or customer support.
Reduce the amount of MIDI
messages that are being
transmitted.
Message Meaning
The MIDI IN
MIDI Offline!
connection was
broken.
The SYSTEM-8 was
unable to start up.
The program could
not be read correctly.
Program Error!
Alternatively, the
system update
program may be
invalid.
Since the SYSTEM-8 is
Now Playing!
playing, this operation
cannot be executed.
Since the SYSTEM-8 is
Now recording, this
Recording! operation cannot be
executed.
The file was not found
Not Found!
on the SD card.
Action
Check that there is no
problem with the MIDI
cable connected to the
SYSTEM-8's MIDI IN, and
that the MIDI cable was not
disconnected.
Use the correct program to
perform the update once
again. If this does not solve
the problem, contact your
dealer or customer support.
Stop playback before you
execute the operation.
Stop recording before you
execute the operation.
Make sure that the file
exists on the SD card.