Download
Share
Print this page
  1. Manuals
  2. Brands
  3. PowerBass Manuals
  4. Stereo System
  5. 4XL-65C
  6. Application manual

PowerBass 4XL-65C Application Manual

Mid-range driver component set
Hide thumbs

Advertisement

Quick Links

Download this manual
4XL-65C
Mid-Range Driver Component Set
Application Guide

Advertisement

loading

Related Manuals for PowerBass 4XL-65C

Summary of Contents for PowerBass 4XL-65C

  • Page 1 4XL-65C Mid-Range Driver Component Set Application Guide...
  • Page 3 170 dB. Please observe all local sound ordinances while listening to your PowerBass Xtreme system. PowerBass USA, Inc. accepts no liability for hearing loss, bodily injury, or property damage due to the result...
  • Page 4 Computed Aided External 12dB Crossover allows for smooth transition between the midrange and tweeter Protective Steel Grills Included The 4XL-65C Mid-Range driver is designed for infinite baffle applications. They are not subwoofers and should not be used to reproduce frequencies below 90Hz.

  • Page 5: Preparing For Installation

    TIPS TO GET THE MOST OUT OF YOUR POWERBASS SYSTEM Your PowerBass Xtreme speakers have been meticulously engineered and designed to handle high power musical reproduction. Despite their rugged construction, it is possible to damage your speaker if they are improperly used. In general, you will hear distortion as a so-called warning before any damage occurs.

  • Page 6: Installation Precautions

    INSTALLATION PRECAUTIONS NOTE: Proceed only if you are a qualified installer otherwise; let your dealer do it. • Always wear protective eyewear when using tools. • Turn off all stereo and other electrical devices before you begin. • Disconnect the (-) negative lead from your vehicle’s battery. •...
  • Page 7 COMPONENT SYSTEM INSTALLATION Component Woofer The proper installation procedure for mounting these high performance mid-range speakers is to secure the speaker to the vehicle’s speaker mounting hole. Once the speaker is in place, determine if the sup- plied grill needs to be installed. If so, place the grill in place over the speaker and screw the speaker into the mounting hole.

  • Page 8: Installing The Tweeter

    INSTALLING THE MID-RANGE Determine where the speaker will be mounted. Make sure there is a flat area large enough for the speaker to fit properly. An uneven mounting surface can damage the driver. Check to make sure the space you have selected for the speaker will not interfere with the operation of the vehicle.
  • Page 9 CROSSOVER NETWORK INSTALLATION AND WIRING Your PowerBass Xtreme Component system contains two separate 2-way crossover networks. When choosing a location to mount the crossovers, keep in mind they contain electronic parts which can be damaged by moisture and dirt. Correct wiring of the crossover is critical to avoid damage to the speakers and ensure true high fi delity sound.
  • Page 10 Crossover Network TWEETER SPECIFICATIONS This manual is the exclusive property of PowerBass USA, Inc. Any reproduction of this manual, or use other than its intentions is strictly prohibited without the express consent of PowerBass USA, Inc. Copyright 2017 PowerBass USA, Inc.
  • Page 11 Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for PowerBass any other liability in connection with the sale of this product.
  • Page 12 PowerBass Xtreme – A division of PowerBass USA, Inc. 2133 S. Green Privado – Ontario, CA 91761 Tel. (909) 923-3868 – Fax (909) 923-8048 www.powerbassusa.com...