Table of Contents
Advertisement
Option
Description
Default setting: Not set
Strong Password
Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
Password
Allows you to specify the minimum and max password lengths of Administrator and System passwords.
Configuration
•
•
Password Bypass
Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they
are set. The options are:
•
•
Default setting: Disabled
Password Change
Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is
set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup
Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set.
Changes
If disabled the setup options are locked by the admin password.
•
UEFI Capsule
Allows you to enable or disable. This option controls whether this system allows BIOS updated via UEFI capsule
Firmware Updates
update packages. The options are:
•
TPM 2.0 Security
Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
•
•
•
•
•
•
•
•
•
Computrace
Allows you to activate or disable the optional Computrace software The options are:
•
NOTE:
Successful password changes take effect immediately.
NOTE:
If Strong Password is enabled, Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least 8 characters long.
minimum -4(by default, if you want to change you can increase the number)
maximum -32 ( you can decrease the number)
Disabled
Reboot bypass
allow wireless switch changes
Enable UEFI Capsule Firmware—enabled by default
TPM On (selected by default)
Clear (option is disabled)
PPI Bypass for Enabled Commands (selected by default)
PPI Bypass for Disabled Commands
Disabled
Enabled
Attestation enable (selected by default)
Key storage enable (selected by default)
SHA-256 (selected by default)
NOTE:
To upgrade or downgrade TPM1.2/2.0, download the TPM wrapper tool (software).
Deactivate
System setup
71
Advertisement
Table of Contents
