Installing The Touchpad; Removing The Led Board - Dell Vostro 15-7570 Owner's Manual

Installing the touchpad

1 Place the touchpad into the slots on the display assembly.
2 Replace the M2x2L (4) screws that secure touchpad on the display assembly.
3 Install the:
a back cover
b rear cover
c memory module
d SSD card
e battery
f base cover
4 Follow the procedure in
LED board

Removing the LED board

1 Follow the procedure in
2 Remove the:
a base cover
b battery
c SSD card
d memory module
e rear cover
f back cover
3 To remove LED board:
a Lift the latch and disconnect the LED board cable [1].
b Remove M2x3L screw that secures the LED board cable to the display assembly [2].
36 Removing and installing components
After working inside your computer.
Before working inside your computer.