Table of Contents
Advertisement
IDE Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave device. These four
items let you assign which kind of PIO (Programmed Input/Output) is used by
IDE devices. Choose Auto to let the system auto detect which PIO mode is
best, or select a PIO mode from 0-4.
IDE Primary/Secondary Master/Slave UltraDMA (Auto)
Each IDE channel supports a master device and a slave device. This
mainboard supports UltraDMA technology, which provides faster access to
IDE devices.
If you install a device that supports UltraDMA, change the appropriate item on
this list to Auto. You may have to install the UltraDMA driver supplied with this
mainboard in order to use an UltraDMA device.
IDE Burst Mode (Enabled)
This option, when enabled will instruct the system to send every write
transaction to the write buffer. Burstable transactions then burst onto the PCI
bus and nonburstable transactions do not.
Press <Esc> to return to the Integrated Peripherals screen.
SIS OnChip PCI Device
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
SIS-7012 AC97Audio
SIS-7013 S/W Modem
System Memory Size
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
SIS-7012 AC97 AUDIO (Enabled)
Enables and disables the onboard audio chip. Disable this item if you are
going to install a PCI audio add-on card.
SIS-7013 S/W Modem (Auto)
Enables and disables the onboard modem. Disable this item if you are going
to install an external modem.
SIS OnChip PCI Device
[Enabled ]
[Enabled]
[32MB]
+/-/PU/PD:Value:
F10: Save ESC: Exit
F6:Fail-Safe Defaults
34
Item Help
Menu Level
F1:General Help
F7:Optimized Defaults
Advertisement
Table of Contents
